水中導電度感測器 Contacting Conductivity Sensor, Low Conductivity (k=0.05), with ½" PVDF Compression Fitting
產品編號:3422A1A
Ultimate accuracy from ultra-pure to high conductivity applications. 滿足超純水應用到高導電度應用之監測。
Contacting conductivity sensor with a nominal cell constant k = 0.05 cm-1, ½-inch NPT PVDF compression fitting, 6 m analogue cable, and titanium electrode. 鈦材質電極
量測範圍 Measuring range : 0 - 100 µS/cm, 0.002 - 20 MΩ.
- High Performance Design
- Resistivity and Conductivity Measurement Capability
- Versatile mounting styles
- Full-Featured “Plug and Play” with Digital SC Controllers *使用Hach SC系列水質數位控制主機進行監控
關鍵字 : 超純水 導電度 分析 儀, Ultra pure water 線上 導電度計, 水 導電度 線上監測儀, online conductivity analyzer,
Contacting conductivity sensor with a nominal cell constant k = 0.05 cm-1, ½-inch NPT PVDF compression fitting, 6 m analogue cable, and titanium electrode. 鈦材質電極
量測範圍 Measuring range : 0 - 100 µS/cm, 0.002 - 20 MΩ.
- High Performance Design
- Resistivity and Conductivity Measurement Capability
- Versatile mounting styles
- Full-Featured “Plug and Play” with Digital SC Controllers *使用Hach SC系列水質數位控制主機進行監控
關鍵字 : 超純水 導電度 分析 儀, Ultra pure water 線上 導電度計, 水 導電度 線上監測儀, online conductivity analyzer,
High Performance Design
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
Resistivity and Conductivity Measurement Capability
These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.
Versatile mounting styles
Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.
Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.
Full-Featured “Plug and Play” with Digital Hach SC Controllers
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”