多參數水質感測數位控制主機 SC1000 Multi-Parameter Universal Controller Display Module with Modbus TCP/IP
產品編號：LXV402.99.10002
The Hach SC1000 Multi-parameter Universal Controller is a state-of-the-art modular transmitter system. The SC1000 consists of a Display Module and at least one Probe Module. Probe Modules for the SC1000 can be networked together to accommodate up to 32 digital sensors or analyzers. The SC1000 Display Module is intuitive, with an easy to use interface and large color touch-screen display that can be used for any number of parameters. One Display Module controls one or more Probe Modules connected by a digital network. The Display Module is fully portable, and can be disconnected and moved anywhere within the network. The Hach SC1000 Display Module is available with GSM/GPRS, Ethernet, and TCP/IP capability.
全新儀表控制平台概念 - Hach sc1000多參數通用控制器 Controller Display Module是Hach所有數位感測器的操作平台, 最多可連接8個電極, 多台sc1000可連在一起組成網路。
Certifications :
European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
全新儀表控制平台概念 - Hach sc1000多參數通用控制器 Controller Display Module是Hach所有數位感測器的操作平台, 最多可連接8個電極, 多台sc1000可連在一起組成網路。
Certifications :
European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
- 電極模組：單個電極模組可連接 8 個電極；多個電極模組相互聯網，可共用一個顯示模組。在電極模組裏面，也是由模擬輸出模組，數位模組等組成，功能完善，結構靈活
- 顯示模組：sc1000 顯示模組擁有彩色的觸摸螢幕、功能完備的控制器。直觀簡單的操作介面
- 即插即用：sc1000 只要將傳感器插入電極模組即可使用，無需專門設定或配置軟體
- 多種電極：Hach 的數十種類型電極都可與其相接
- 擴展輸出：要增加額外的繼電器和模擬信號輸入、輸出功能，除了在網路增加多個電極模組以外，也可以增加DIN-rail 通訊模組的方式進行
- 通訊方式：多台sc1000 控制器之間，或與連接的傳感器之間，數位信號可靠，整體性能佳
- 與外界儀器的模擬訊號通訊，數位信號通訊；數位通訊協議：MODBUS PROFIBUS
More Confidence in Your Instrument’s Performance
Available exclusively on Hach instruments, Prognosys predictive diagnostics uses innovative diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance and upcoming maintenance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements. Process control has never been easier.
Available exclusively on Hach instruments, Prognosys predictive diagnostics uses innovative diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance and upcoming maintenance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements. Process control has never been easier.
Plug and Play Operation
There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.
There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.
Communication Options to Fit Any Application Need
The Hach SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. Available with analog 4-20mA, Modbus 485, Profibus DP, or HART digital communication options.
Expandable and Upgradable
The SC1000 controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.
The SC1000 controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.