(純水)溶氧分析儀 Orbisphere 3650/113 Portable Analyzer, Gaseous or Dissolved Oxygen (O₂), units: % (gaseous) or ppm (liquid)
產品編號3650/113
The Orbisphere 3650/3655 offers a robust portable system solution for oxygen measurement.

Compliance Certifications : CE: EN61010-1: LVD Directive
ISO9001/EN29001
Parameter 分析參數 : Oxygen, gaseous or dissolved
Phase Type : Combined liquid and gas phase
Display Resolution : 0.001 ppm or 0.001%
Sample Pressure : Max. 10 bar (145 psi)


Designed to be used with Orbisphere high quality oxygen sensors, these instruments provide accurate and quick measurements in both the dissolved and gas phases.
Hach Orbisphere 3650 純水等級可攜式溶氧分析儀設計和 Orbisphere 氧氣感測器搭配使用,可在溶解相和氣相中提供準確、快速的測量。

The portable instruments are designed for the harsh environment of breweries and are also perfectly adapted for laboratory or verification purposes in the power generation, electronics, life sciences and other beverage industries.
適用領域 : 啤酒廠、電力、電子、製藥/生命科學和其他飲料行業的實驗室或驗證用途。

Ideal for Harsh Environments 嚴苛環境應用的理想選擇
Simple Operation and Data Management 簡單的操作和資料管理
Simple Maintenance 維護簡單
Easy Calibration 輕鬆校正
產品特色
Ideal for Harsh Environments
The Orbisphere 3650 offers a robust portable system solution for oxygen measurement. The compact stainless steel construction is designed for the harsh environment of breweries, but it is also perfectly adapted for laboratory or verification purposes in other beverage applications. In addition, the 3650 can be used across a wide range of applications in the power generation, electronics and life sciences industries.
 
Designed for use with the Orbisphere GA2400/GA2800 high quality oxygen sensor, these instruments provide fast, accurate and repeatable measurements in both the dissolved and gaseous phase, at line or in the laboratory. For low level applications, the specially configured Orbisphere 3655 measures to 0.1 ppb oxygen.
 
Simple Operation and Data Management
The Orbisphere 3650 inlet tube is connected to a sample point or to a piercing device by a simple connector, making it quick and easy to install. The sample flows over the sensor membrane in the flow chamber, with an output valve controlling the sample's flow rate.
Each instrument comes with a Windows® software package that enables the user to analyze up to 500 stored measurements and to configure the instrument. Using the RS232 connection, stored measurements can be simply downloaded to a PC for analysis.
 
Simple Maintenance
The use of the Orbisphere GA2400/GA2800 sensor with this portable instrument allows for very quick cleaning with nothing more than tap water and requires no technical skills. The sensor refurbishment (typically every 6 months) takes only 3 minutes with a pre-mounted membrane cartridge and electrolyte, eliminating any risk of incorrect membrane positioning.
The Orbisphere 3650 uses two C-type, NiMH or alkaline batteries. Changing the batteries is quick and easy; stored measurements are not lost if batteries go flat or are being changed.
 
Easy Calibration
Calibration after each sensor refurbishment is recommended. A traceable and simple calibration can be done directly in air by measuring its oxygen content with the use of the built-in pressure sensor and the automatic software calculation. Alternatively, the calibration can be performed against a liquid or gaseous sample of known concentration by simply entering the gas concentration via the keyboard.