水中化學需氧量試劑 Chemical Oxygen Demand (COD) TNTplus Vial Test, HR (20-1,500 mg/L COD), 25 Tests
產品編號：TNT822
Chemical Oxygen Demand - Expert High Range COD test made simple.
Recommended COD test for wastewater influent.
適用於廢污水進水之化學需氧量濃度分析
The Chemical Oxygen Demand analysis provides important information for the water treatment process and is essential to calculate the BOD COD ratio in wastewater. Due to this, the COD is one of the most frequently analyzed wastewater parameters globally.
Hach TNTplus COD vial test reagents are incredibly simple to use and cut down significantly on waste generation compared to other COD test kits. TNT822 is based on Hach Method 8000 for virtually any type of water sample. Method 8000 is USEPA approved for wastewater analysis under 40 CFR 136.3 and based on Standard Methods 5220 D.
測試方法 #8000 經過美國環保署 USEPA 批准認可，可根據 40 CFR 136.3 進行廢污水分析，並根據標準方法 5220 D。
Hach TNTplus COD vial tests are available in multiple ranges. TNT822 provides a result in the High Range of 20 - 1500 mg/L COD and is often used for Chemical Oxygen Demand measurement in wastewater influent.
Method
For determination of Chemical Oxygen Demand (COD) by the Reactor Digestion Method. Simply pipette in sample, digest, and read in your Hach Spectrophotometer. 25 tests per box.
Method Name : Reactor Digestion
Method : 8000
Range 量測範圍 : 20 - 1500 mg/L COD
Instrument : 使用Hach 分光光度計 DR3900, DR6000, DR1900, DR2800, DR3800, DR5000 進行分析
Recommended COD test for wastewater influent.
適用於廢污水進水之化學需氧量濃度分析
The Chemical Oxygen Demand analysis provides important information for the water treatment process and is essential to calculate the BOD COD ratio in wastewater. Due to this, the COD is one of the most frequently analyzed wastewater parameters globally.
Hach TNTplus COD vial test reagents are incredibly simple to use and cut down significantly on waste generation compared to other COD test kits. TNT822 is based on Hach Method 8000 for virtually any type of water sample. Method 8000 is USEPA approved for wastewater analysis under 40 CFR 136.3 and based on Standard Methods 5220 D.
測試方法 #8000 經過美國環保署 USEPA 批准認可，可根據 40 CFR 136.3 進行廢污水分析，並根據標準方法 5220 D。
Hach TNTplus COD vial tests are available in multiple ranges. TNT822 provides a result in the High Range of 20 - 1500 mg/L COD and is often used for Chemical Oxygen Demand measurement in wastewater influent.
Method
For determination of Chemical Oxygen Demand (COD) by the Reactor Digestion Method. Simply pipette in sample, digest, and read in your Hach Spectrophotometer. 25 tests per box.
Method Name : Reactor Digestion
Method : 8000
Range 量測範圍 : 20 - 1500 mg/L COD
Instrument : 使用Hach 分光光度計 DR3900, DR6000, DR1900, DR2800, DR3800, DR5000 進行分析
Easy and safe handling
The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk.
The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk.
No reagent blank necessary
The high quality of TNTplus® vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!
The high quality of TNTplus® vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!
Lot after lot - Be Right
Truecal™ with each vial includes the calibration data for each individual lot, reducing variation in results. This allows you to meet reporting standards and to perform proficiency testing with higher confidence.
Truecal™ with each vial includes the calibration data for each individual lot, reducing variation in results. This allows you to meet reporting standards and to perform proficiency testing with higher confidence.
Automatic method detection
The bar-coded vials allow for automatic method detection and measurement by the spectrophotometer, considerably increasing the speed of analysis. Errors are reduced as instrument averages 10 readings and rejects outliers from scratched, flawed, or dirty glassware.
The bar-coded vials allow for automatic method detection and measurement by the spectrophotometer, considerably increasing the speed of analysis. Errors are reduced as instrument averages 10 readings and rejects outliers from scratched, flawed, or dirty glassware.
Documented shelf life and COA
New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Lot specific information (COA) is available on RFID tag on the box.
New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Lot specific information (COA) is available on RFID tag on the box.
