水中硝酸鹽氮線上感測器 N-ISE sc Nitrate Sensor
產品編號：LXV440.99.20012
ISE probes for the online measurement of Nitrate provide trending information and minimal maintenance, at an affordable price point.
Carries out continuously direct measurements using an ion-selective electrode. No need for reagents or sample preparation. Compensated interference by chloride. Integrated pHD reference element.
離子選擇電極法進行連續直接測量。無需試劑或樣品製備。透過氯化物補償干擾。整合 pHD 參考元件。
The Cartrical plus technology makes installation and cartridge replacement very easy. The code of the factory-calibrated sensor is automatically transferred to the system. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes. The cartridge has a long lifetime in the application due to protected membranes.
The sensor is fully compatible with all digital SC controllers. Link2sc technology allows comparing measurement values from process and laboratory. An easy-to-hand cleaning unit is available.
Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
Parameter 監測參數 : NO3-N
Measurement Method 量測方法 : Potentiometric ion-selective measurement
Measuring Interval : Continuous 連續
Range 量測範圍 : 0 - 1000 mg/L NO3-N
pH Range : 5 - 9 pH
Repeatability 重複性 : ± 5% + 0.5 (with standard solution) NO3-N
Lower Limit of Detection (LOD) : 0.2 mg/L NO3-N
Controller Compatibility : SC200, SC1000, SC4500. All controllers sold separately
Applications 應用 :
Industrial Wastewater
Municipal Water
Nutrient Monitoring
Primary Treatment
Secondary Treatment
Tertiary Treatment
●新一代感測器和膜 - 效能更穩定
●可自動補償干擾離子的影響
●內建矩陣校正
●水樣無需預處理，適用於全天候不間斷的線上監測
●全新的保護塗層，確保膜頭使用壽命更長
●使用 Hach SC系列 digital controllers 數位水質控制主機進行監控
●可選配清洗功能裝置，降低日常維護量
關鍵字 : 污水 NO3-N 監測, 污水 硝酸鹽感測器, 硝酸鹽 sensor, Nitrate sensor, 污水 硝酸鹽 濃度 分析儀, 硝氮 監測儀, 線上硝酸鹽分析儀, 水中 硝酸鹽氮 線上分析儀
Carries out continuously direct measurements using an ion-selective electrode. No need for reagents or sample preparation. Compensated interference by chloride. Integrated pHD reference element.
離子選擇電極法進行連續直接測量。無需試劑或樣品製備。透過氯化物補償干擾。整合 pHD 參考元件。
The Cartrical plus technology makes installation and cartridge replacement very easy. The code of the factory-calibrated sensor is automatically transferred to the system. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes. The cartridge has a long lifetime in the application due to protected membranes.
The sensor is fully compatible with all digital SC controllers. Link2sc technology allows comparing measurement values from process and laboratory. An easy-to-hand cleaning unit is available.
Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
Parameter 監測參數 : NO3-N
Measurement Method 量測方法 : Potentiometric ion-selective measurement
Measuring Interval : Continuous 連續
Range 量測範圍 : 0 - 1000 mg/L NO3-N
pH Range : 5 - 9 pH
Repeatability 重複性 : ± 5% + 0.5 (with standard solution) NO3-N
Lower Limit of Detection (LOD) : 0.2 mg/L NO3-N
Controller Compatibility : SC200, SC1000, SC4500. All controllers sold separately
Applications 應用 :
Industrial Wastewater
Municipal Water
Nutrient Monitoring
Primary Treatment
Secondary Treatment
Tertiary Treatment
●新一代感測器和膜 - 效能更穩定
●可自動補償干擾離子的影響
●內建矩陣校正
●水樣無需預處理，適用於全天候不間斷的線上監測
●全新的保護塗層，確保膜頭使用壽命更長
●使用 Hach SC系列 digital controllers 數位水質控制主機進行監控
●可選配清洗功能裝置，降低日常維護量
關鍵字 : 污水 NO3-N 監測, 污水 硝酸鹽感測器, 硝酸鹽 sensor, Nitrate sensor, 污水 硝酸鹽 濃度 分析儀, 硝氮 監測儀, 線上硝酸鹽分析儀, 水中 硝酸鹽氮 線上分析儀
Cost-Effective Trending Information
The N-ISE sc Sensor utilizes ion selective electrode (ISE) technology to provide your plant with high level trending information while saving money by eliminating the need for reagents and sample preparation.
The N-ISE sc Sensor utilizes ion selective electrode (ISE) technology to provide your plant with high level trending information while saving money by eliminating the need for reagents and sample preparation.
Minimal Maintenance with Simple Cartridge Replacement
The sensor works with a Cartrical cartridge that comes factory calibrated so there is little maintenance necessary. Cartridge replacement is simple: unscrew the old cartridge, plug in the new one, and the sensor is ready for measurement.
The sensor works with a Cartrical cartridge that comes factory calibrated so there is little maintenance necessary. Cartridge replacement is simple: unscrew the old cartridge, plug in the new one, and the sensor is ready for measurement.
Simple, Accurate Calibration
Easy to perform, fail-safe calibration corrections compensate for naturally occurring calibration drift in ISE instruments. An advanced menu structure allows you to perform corrections without manual entry of values via Ethernet, SD card or Bluetooth.
Easy to perform, fail-safe calibration corrections compensate for naturally occurring calibration drift in ISE instruments. An advanced menu structure allows you to perform corrections without manual entry of values via Ethernet, SD card or Bluetooth.