水中氨線上監測儀 Amtax sc Ammonium Analyzer, Outdoor, 0.05-20.0mg/L NH₄-N, One Channel Continuous Sample
產品編號：6157400
Transparent, high quality measurement technology for reliable values with short response time
Hach 的 Amtax 水中氨線上分析儀為各種廢污水應用提供寬廣的測量範圍。 檢測極限低至 0.05 mg/L。 堅固設計專為輕鬆安裝於戶外監測站而設計。 每日自動清潔和校正。 試劑更換輕鬆和零件更換容易。
Hach's Amtax Ammonium Analyzer provides a wide measurement range for a variety of wastewater applications. Low detection limit of 0.05 mg/L. Environmentally controlled for rugged, outdoor installations. Designed specifically for easy installation at the measurement point. Automatic cleaning and calibration every day. Easy access to reagents and wear parts.
搭配專利 Prognosys 儀器預測診斷系統
Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
使用 Hach SC系列數位控制器 digital controller 進行控制
The Amtax sc must be connected to an SC controller to form a complete loop.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
可選連接至Hach 創新水智慧監控系統 Claros，使您能夠隨時隨地無縫連接和管理儀器、數據和控制流程。
Measurement Method : GSE (Gas Sensitive Electrode) with screw-on membrane cap
Measuring Interval : 5 - 120 min, adjustable per 5 min.
Measuring Principle 量測原理 : NH4 is being converted to NH3 gas, which is being measured at the GSE.
Special Features : ASA UV-resistant, lockable housing, rated to IP55
Automatic cleaning and calibration
Extensive self-diagnostics
Optional 2-channel version for continuous sample preparation
關鍵字 : 廢污水 氨 連續檢測, 飲用水 氨 監測, 廢污水 銨 濃度線上分析
Hach 的 Amtax 水中氨線上分析儀為各種廢污水應用提供寬廣的測量範圍。 檢測極限低至 0.05 mg/L。 堅固設計專為輕鬆安裝於戶外監測站而設計。 每日自動清潔和校正。 試劑更換輕鬆和零件更換容易。
Hach's Amtax Ammonium Analyzer provides a wide measurement range for a variety of wastewater applications. Low detection limit of 0.05 mg/L. Environmentally controlled for rugged, outdoor installations. Designed specifically for easy installation at the measurement point. Automatic cleaning and calibration every day. Easy access to reagents and wear parts.
搭配專利 Prognosys 儀器預測診斷系統
Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
使用 Hach SC系列數位控制器 digital controller 進行控制
The Amtax sc must be connected to an SC controller to form a complete loop.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
可選連接至Hach 創新水智慧監控系統 Claros，使您能夠隨時隨地無縫連接和管理儀器、數據和控制流程。
Measurement Method : GSE (Gas Sensitive Electrode) with screw-on membrane cap
Measuring Interval : 5 - 120 min, adjustable per 5 min.
Measuring Principle 量測原理 : NH4 is being converted to NH3 gas, which is being measured at the GSE.
Special Features : ASA UV-resistant, lockable housing, rated to IP55
Automatic cleaning and calibration
Extensive self-diagnostics
Optional 2-channel version for continuous sample preparation
關鍵字 : 廢污水 氨 連續檢測, 飲用水 氨 監測, 廢污水 銨 濃度線上分析
Wide Measurement Range
Amtax sc Ammonium Analyzers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and ranges up to 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH4-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.
Fast Response Time for Control of Nutrient Removal Process
Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutesand selection of the measurement interval, make the Amtax sc Ammonium Analyzer the fastest responding ammonia analyzer on the market.
Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutesand selection of the measurement interval, make the Amtax sc Ammonium Analyzer the fastest responding ammonia analyzer on the market.
Easy Installation
The Amtax sc Analyzer is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyzer can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the analyzer is ready for use in the network of the SC controller ("plug-and-play").
The Amtax sc Analyzer is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyzer can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the analyzer is ready for use in the network of the SC controller ("plug-and-play").
Low Maintenance and Simple Operation
The analyzer calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyzer offers the most economical reagent consumption. Reagents and wear parts are easily accessible.
The analyzer calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyzer offers the most economical reagent consumption. Reagents and wear parts are easily accessible.
Optional with Sample Preparation or Second Channel
The Amtax sc analyzer works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyzer while air bubbles constantly clean the filtration membrane.
The analyzer is also available as two channel version for measurement at two different sampling points.
The Amtax sc analyzer works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyzer while air bubbles constantly clean the filtration membrane.
The analyzer is also available as two channel version for measurement at two different sampling points.