水中有機物分析儀 UVAS plus sc UV Sensor for organic load with Controller
產品編號：
Reagentless online measurement of dissolved Organic Matter
Hach UVAS sc 有機物自動感測系統採用國際通用技術，UV紫外光吸收方法線上自動監測水中溶解有機物 - 無須試劑的環保水質監測系統。可用於污水、地表水、工業循環水中連續監測有機污染物。自來水原水有機污染程度的綜合評估指標
Hach's UVAS plus sc digital UV probe is designed for the reagent-free determination of the organic load via the spectral absorption coefficient (SAC) in the medium or in the bypass. Reliable measurement values are immediately available due to the direct UV measurement. The low maintenance sensor is self-cleaning and with its stainless steel housing even applicable in difficult environmental conditions.
The UVAS plus sc probe covers a broad spectrum of applications, including: protection of treatment plants from industrial dischargers, monitoring shock loads from internal plant processes, control of activated sludge processes, control methanol feed in BNR based on organic loading, final effluent monitoring and monitoring efficiency of UV disinfection processes.
The sensor can be connected to all SC controllers thus providing versatile output options including 4-20 mA Output, Modbus RS485, Profibus, or HART.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
● 採用國際通用技術，經過驗證、準確的紫外光吸收方法進行水中有機物的測定
● 無需樣品預處理，反應分析速度快，無需任何試劑、無需取樣設備
● 感測器具備機械自清洗功能
● 可提供浸入式和流通池兩種安裝方式
Analysis range of 1mm probe : 2 - 3000 1/m
Analysis range of 2 mm probe : 0 - 1500 1/m
Analysis range of 5 mm probe : 0.1 - 600 1/m
Analysis range of 50 mm probe : 0.01 - 60 1/m
關鍵字 : 污水 有機物 線上 感測器, 污水 有機物 自動監測 儀, 廢污水 有機物 線上監測, wastewater organic sensor
Hach UVAS sc 有機物自動感測系統採用國際通用技術，UV紫外光吸收方法線上自動監測水中溶解有機物 - 無須試劑的環保水質監測系統。可用於污水、地表水、工業循環水中連續監測有機污染物。自來水原水有機污染程度的綜合評估指標
Hach's UVAS plus sc digital UV probe is designed for the reagent-free determination of the organic load via the spectral absorption coefficient (SAC) in the medium or in the bypass. Reliable measurement values are immediately available due to the direct UV measurement. The low maintenance sensor is self-cleaning and with its stainless steel housing even applicable in difficult environmental conditions.
The UVAS plus sc probe covers a broad spectrum of applications, including: protection of treatment plants from industrial dischargers, monitoring shock loads from internal plant processes, control of activated sludge processes, control methanol feed in BNR based on organic loading, final effluent monitoring and monitoring efficiency of UV disinfection processes.
The sensor can be connected to all SC controllers thus providing versatile output options including 4-20 mA Output, Modbus RS485, Profibus, or HART.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
● 採用國際通用技術，經過驗證、準確的紫外光吸收方法進行水中有機物的測定
● 無需樣品預處理，反應分析速度快，無需任何試劑、無需取樣設備
● 感測器具備機械自清洗功能
● 可提供浸入式和流通池兩種安裝方式
Analysis range of 1mm probe : 2 - 3000 1/m
Analysis range of 2 mm probe : 0 - 1500 1/m
Analysis range of 5 mm probe : 0.1 - 600 1/m
Analysis range of 50 mm probe : 0.01 - 60 1/m
關鍵字 : 污水 有機物 線上 感測器, 污水 有機物 自動監測 儀, 廢污水 有機物 線上監測, wastewater organic sensor
Continuous, Automatic Early Warning Systems
Use the Hach UVAS plus sc UV Absorbance/Transmittance Sensor to continuously protect plant treatment processes from high influent organic loads. Operators can use the continuous readings of UV absorbance or transmission to watch for sudden changes in organic load that would require alternate treatment procedures.
Control Activated Sludge Processes
Activated sludge processes require precise balancing of organic load, aeration, and nutrients. Continuous trending of the organics in the system with the UVAS plus sc sensor can help operators know how to balance other factors resulting in cost and time savings.
Self-cleaning Wiper System
With the UVAS plus sc sensor submerged in the sample stream, the detector windows are automatically cleaned by a built-in wiper that eliminates surface films or particles that can diminish accuracy.
Monitor Efficiency of UV Disinfection Process
UV light transmittance (UVT) is critical in the delivery of dose in a UV reactor. The delivered dose is determined by, among other things, the UVT of the source water, the intensity of the UV lamps, and the flow rate of the water source. UVT can be affected by many factors, from a simple change in the seasons to storm events. Potential changes in UVT should be considered in a UV disinfection system for optimized dose delivery. Hach's UVAS plus sc is designed to provide continuous UVT measurement of pre-disinfected source water. Operational costs related to sampling for UVT may be reduced with continuous online measurement. Data can immediately be incorporated into the operation in real time.
Self Diagnostics and Easy Maintenance
Diagnostic routines built into the UVAS plus sc sensor reduce the need for extensive calibration and maintenance. Only semi-yearly inspection and replacement of the wiper and seals is needed.