水中導電度感測器 Sanitary (CIP) Contacting Conductivity Sensor for Low Conductivity, K=0.05
產品編號：3455A6A
Ultimate accuracy from ultra-pure to high conductivity applications. 從超純水到高導電度應用的極致準確水質分析。
Nominal Cell Constant (K) = 0.05, Sanitary (CIP) 1-1/2 inch Flange, 6m (20 ft) Analog Cable, 316 Stainless Steel Electrode
Range 量測範圍 : 0 - 100 µS/cm
Measurement Range 量測範圍 2 : 0.002 - 20 MΩ
Pressure Range : 0 - 300 psi (20.7 BAR)
Accuracy : ±2 % of reading above 200 µS/cm
Cell Constant k : 0.05
Repeatability ±0.5 % of reading
Response Time T90 30 s of step change
Sensitivity : ±0.5 % of reading
Sensor Type : Analog
Temperature Measurement : -20 - 200 °C
Temperature Sensor : PT1000 RTD
*使用Hach SC系列 Controllers 水質控制器進行控制
關鍵字 : 水中 導電度計, 水中導電度線上分析儀, 線上監測 導電度, online conductivity analyzer
Nominal Cell Constant (K) = 0.05, Sanitary (CIP) 1-1/2 inch Flange, 6m (20 ft) Analog Cable, 316 Stainless Steel Electrode
Range 量測範圍 : 0 - 100 µS/cm
Measurement Range 量測範圍 2 : 0.002 - 20 MΩ
Pressure Range : 0 - 300 psi (20.7 BAR)
Accuracy : ±2 % of reading above 200 µS/cm
Cell Constant k : 0.05
Repeatability ±0.5 % of reading
Response Time T90 30 s of step change
Sensitivity : ±0.5 % of reading
Sensor Type : Analog
Temperature Measurement : -20 - 200 °C
Temperature Sensor : PT1000 RTD
*使用Hach SC系列 Controllers 水質控制器進行控制
關鍵字 : 水中 導電度計, 水中導電度線上分析儀, 線上監測 導電度, online conductivity analyzer
High Performance Design
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
Resistivity and Conductivity Measurement Capability
These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.
These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.
Versatile Mounting Styles
Sanitary clean in place (CIP) style sensors have 316 stainless steel electrodes and an integral 1-1/2-inch or 2-inch flange. These sensors can be installed using standard sanitary mounting hardware.
Sanitary clean in place (CIP) style sensors have 316 stainless steel electrodes and an integral 1-1/2-inch or 2-inch flange. These sensors can be installed using standard sanitary mounting hardware.
Full-Featured “Plug and Play” Hach sc Digital Controllers
There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”
There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”