水中氨氮/硝酸鹽氮感測器 AN-ISE sc Low cost ISE combination Ammonium and Nitrate probe (immersion), 10 m cable
產品編號：LXV440.99.00012
Hach AN-ISE 線上氨氮/硝酸鹽氮水質監測探頭應用 : 民生污水處理廠，工業廢水處理廠，同步硝化/反硝化過程，間歇式硝化/反硝化過程，序批式反應器(SBR)過程
AN-ISE sc : Combination sensor for ammonium and nitrate
Parameter 分析參數 : NH4-N and NO3-N
Measurement Method 量測方法 : Potentiometric ion-selective electrodes for ammonium, potassium, nitrate and chloride, reference system and temperature sensor
Measuring Interval : Continuous 連續監測
Range 量測範圍 :
0 - 1000 mg/L NH4-N,
0 - 1000 mg/L NO3-N,
0 - 1000 mg/L K+,
0 - 1000 mg/L Cl-
Lower Limit of Detection (LOD) 低偵測線值 : 0.2 mg/L NH4–N and NO3-N
Repeatability 重複性 : ± 5 % of the measured value (with standard solution)+ 0.2 mg/L NH4-N and NO3-N
- 內建之ISE電極可同時補償最強的干擾物質鉀離子和氯離子干擾
- 使用最新研發的碳粉盒加技術
- 無需試劑
- 出廠校正感測器（內建矩陣校正）
- 一個感測器可同時測量氨氮和硝酸鹽兩個參數
- 與所有Hach SC系列數位控制主機(錶頭) digital controllers 相容，即插即用
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
Comes as a complete system from a single supplier. The probe is installed on the side of the tank. An SC controller completes the system. It can be extended to include an automatic cleaning unit with a compressor.
Hach 專利儀器預知維護軟體 Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
*使用Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 水中 氨氮 濃度 監測儀, 廢污水 氨氮連續監測, 污水 氨氮 分析儀, 硝酸鹽氮 監測, 銨離子濃度 監測, 銨離子感測器, 廢水 氨氮濃度 自動監測, 線上監測 廢污水 硝酸鹽 濃度, Ammonium Nitrate sensor, 污水 硝酸鹽氮 分析儀, total nitrogen sensor, 水中 氨氮 硝酸鹽氮 測定
AN-ISE sc : Combination sensor for ammonium and nitrate
Parameter 分析參數 : NH4-N and NO3-N
Measurement Method 量測方法 : Potentiometric ion-selective electrodes for ammonium, potassium, nitrate and chloride, reference system and temperature sensor
Measuring Interval : Continuous 連續監測
Range 量測範圍 :
0 - 1000 mg/L NH4-N,
0 - 1000 mg/L NO3-N,
0 - 1000 mg/L K+,
0 - 1000 mg/L Cl-
Lower Limit of Detection (LOD) 低偵測線值 : 0.2 mg/L NH4–N and NO3-N
Repeatability 重複性 : ± 5 % of the measured value (with standard solution)+ 0.2 mg/L NH4-N and NO3-N
- 內建之ISE電極可同時補償最強的干擾物質鉀離子和氯離子干擾
- 使用最新研發的碳粉盒加技術
- 無需試劑
- 出廠校正感測器（內建矩陣校正）
- 一個感測器可同時測量氨氮和硝酸鹽兩個參數
- 與所有Hach SC系列數位控制主機(錶頭) digital controllers 相容，即插即用
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
Comes as a complete system from a single supplier. The probe is installed on the side of the tank. An SC controller completes the system. It can be extended to include an automatic cleaning unit with a compressor.
Hach 專利儀器預知維護軟體 Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
*使用Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 水中 氨氮 濃度 監測儀, 廢污水 氨氮連續監測, 污水 氨氮 分析儀, 硝酸鹽氮 監測, 銨離子濃度 監測, 銨離子感測器, 廢水 氨氮濃度 自動監測, 線上監測 廢污水 硝酸鹽 濃度, Ammonium Nitrate sensor, 污水 硝酸鹽氮 分析儀, total nitrogen sensor, 水中 氨氮 硝酸鹽氮 測定
Trustable results for ammonium and nitrate
Looking for new ways to stretch money and reduce consumable cost? We have the perfect solution for you! Our new combination sensor with ion-selective electrode (ISE) technology was developed to measure both NH4 and NO3 at the same spot. What is unique? The most significant interferences of K and Cl are simultaneously compensated by integrated ISE electrodes, ensuring accurate results 24h/7days.
Easy handling with Cartrical cartridge plus
The compact Cartrical cartridge contains four electrodes which are calibrated to each other before leaving the factory. Through the newly developed Cartrical plus technology, the factory calibration is automatically identified after replacing the cartridge. The compact design does away with tiresome handling and adjustment of individual electrodes: just unscrew the old cartridge, plug in the new one and the sensor is immediately ready to measure.
The compact Cartrical cartridge contains four electrodes which are calibrated to each other before leaving the factory. Through the newly developed Cartrical plus technology, the factory calibration is automatically identified after replacing the cartridge. The compact design does away with tiresome handling and adjustment of individual electrodes: just unscrew the old cartridge, plug in the new one and the sensor is immediately ready to measure.
With a menu-guided operation and step-by-step guide with clear text, the combination AN-ISE sc sensor is very easy to use. It works directly with every SC controller without complicated wiring or set up procedures: just plug and play. The common SC controller platform allows intuitive usage not only for ammonium and nitrate but also for other parameters like pH, DO, etc.
Always under control
In combination with SC1000 controller alert messages from AN-ISE sc sensor can be transmitted to the control room or by SMS / e-mail to a mobile phone. By this you are always informed about the status of your processes, early enough to react quickly.
In combination with SC1000 controller alert messages from AN-ISE sc sensor can be transmitted to the control room or by SMS / e-mail to a mobile phone. By this you are always informed about the status of your processes, early enough to react quickly.
You can trust our ISE experience gathered in many waste water applications around the world. Based on this we have developed the next ISE generation to fulfill your requirements even better. Our application team is always close by.