Orbisphere 3662EX ATEX Controller for Oxygen (O₂) measurement, wall mount, 6.5 – 13.5 VDC, units : ppm/ppb
產品編號3662EX/100
Intrinsically Safe Analyzer
The 366xEx family of instruments measures oxygen (O₂), hydrogen (H₂), and ozone (O₃) in areas where hazardous and flammable conditions are possible. When coupled with a choice of membrane covered, electrochemical sensors, the 366xEx is suitable for sampling dissolved concentrations from trace ppb to supersaturation, and gaseous con-centrations from ppb to percent (%) levels. These sensors can be constructed from a variety of chemically resistant materials and use an assortment of membranes with permeability and chemical resistance to optimize long-term measurement performance.
366xEx 系列防爆認證控制器可在可能存在危險和易燃條件的區域測量氧氣 (O2)、氫氣 (H2) 和臭氧 (O3)。 當與薄膜覆蓋的電化學感測器結合使用時,366xEx 控制器適用於對從微量 ppb 到過飽和的溶解濃度以及從 ppb 到百分比 (%) 水平的氣體濃度進行採樣。 這些感測器可由各種耐化學性材料製成,並使用各種具有滲透性和耐化學性的膜來優化長期測量性能。

Electrode Compatibility : 搭配 Hach Orbisphere 311xxE-xx or A110E-xxS 感測器使用

關鍵字 : 純水 溶氧 防爆認證 控制器, 純水 溶氧 ppb 控制器
產品介紹
ATEX certified
The Orbipshere 3662EX supports European Community ATEX directive and standards with marking: Ex II 1G, Ex ia IIC T4 Ga (corresponds to NFPA Class l Div l Group A,B) and IEC Certification IECEx LCI 09.0026X
 
Consistent and accurate measurements
Used to measure in aqueous or non-aqueous samples such as organics, olefins, fuels, monomers, aromatics, specialty chemicals, water, and other liquids and gases.
 
Easy installation
Easy installation and sampling with in-line and sidestream accessories.
 
Easy calibration
Flexible and verifiable calibration in air, liquid, or gas standard with negligible drift.