通用型水中導電度感測器 General Purpose Contacting Conductivity Sensor, PPS Body, Low Conductivity (k=0.5)
產品編號：3433B8A
Ultimate accuracy from ultra-pure to high conductivity applications.
高精準度分析 - 超純水到高導電度的應用
Contacting conductivity sensor with a nominal cell constant k = 0.5 cm-1, ¾-inch male NPT threaded PPS body, 6 m analogue cable, and graphite electrode.
Measuring range : 0 - 1000 µS/cm, 0,001 - 20 MΩ.
Repeatability : ±0.5 % of reading
Response Time T90 : < 30 s
Sensitivity : ±0.5 % of reading
Accuracy : ±2 % of reading above 200 µS/cm
Operating Temperature Range : -20 - 200 °C
Temperature Sensor : Pt1000 RTD
*使用 Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 高精密型 水中 導電度計, 水中 導電度分析儀, 導電度 探頭, online conductivity analyzer,
高精準度分析 - 超純水到高導電度的應用
Contacting conductivity sensor with a nominal cell constant k = 0.5 cm-1, ¾-inch male NPT threaded PPS body, 6 m analogue cable, and graphite electrode.
Measuring range : 0 - 1000 µS/cm, 0,001 - 20 MΩ.
Repeatability : ±0.5 % of reading
Response Time T90 : < 30 s
Sensitivity : ±0.5 % of reading
Accuracy : ±2 % of reading above 200 µS/cm
Operating Temperature Range : -20 - 200 °C
Temperature Sensor : Pt1000 RTD
*使用 Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 高精密型 水中 導電度計, 水中 導電度分析儀, 導電度 探頭, online conductivity analyzer,
High Performance Design
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
Resistivity and Conductivity Measurement Capability
These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.
These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.
Versatile mounting styles
Non-Metallic General Purpose Sensors have graphite electrodes and ¾-inch male NPT threaded PPS bodies. Mount into a standard ¾-inch pipe tee, 1-½-inch Hach union hardware (for cell constant k=10 sensor only), or fasten onto the end of the pipe.
Non-Metallic General Purpose Sensors have graphite electrodes and ¾-inch male NPT threaded PPS bodies. Mount into a standard ¾-inch pipe tee, 1-½-inch Hach union hardware (for cell constant k=10 sensor only), or fasten onto the end of the pipe.
Full-Featured “Plug and Play” Hach SC Digital Controllers
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”