水中濁度線上感測器 Solitax t-line sc Turbidity immersion probe, 0.001 - 4000 NTU, with wiper, PVC
產品編號：LXV423.99.10000
符合DIN EN ISO 7027 的精密型線上濁度感測器 High-precision process turbidity probe according to DIN EN ISO 7027
濁度測量性能通過 MCERTS 法規認證，同時感測器根據DIN EN ISO 7027採用90°測量方法進行操作。感測器不需任何校正。使用Hach SC系列 digital controllers 數位水質控制主機以顯示和處理監測數據。
The Solitax t-line sc turbidity immersion probe provides high-precision results in clear to strongly turbid liquids. Turbidity measurement performance is certified to MCERTS regulation and the probe operates with a 90° measuring method according to DIN EN ISO 7027. A proven automatic wiper cleaning system allows sustained performance quality in drinking water as well as in waste water applications. The probe does not require any calibration efforts since time-consuming multipoint calibrations with dilution series are replaced by a single correction factor. The Solitax t-line sc probe material is PVC and measurement data is displayed and processed with the help of a digital Hach SC200 or SC1000 controller.
Measuring Principle 量測原理 : Infrared Duo scattered light technique for color-independent turbidity measurement
Turbidity in accordance with DIN EN ISO 7027
Range 量測範圍 : Turbidity: 0.001 - 4000 NTU
Repeatability 重複性 : Turbidity: < 1 %
Response Time T90 反應時間 : 1 - 300 s adjustable
Mounting : Immersion 浸入式
Accuracy:
Turbidity up to 1000 NTU:
without calibration < 5% of the measured value ±0.01 NTU
with calibration < 1% of the measured value ±0.01 NTU
Calibration Method:
Formazin or Stablcal Standard (at 800 NTU)
Applications:
- Nutrient Monitoring
- Pre-Treatment
- Secondary Treatment
- Ultrapure Water
關鍵字: 水中 濁度 線上分析儀, 線上 水中濁度 監測儀, turbidity sensor, online turbidity analyzer, 濁度 傳感器, 線上 濁度計,
濁度測量性能通過 MCERTS 法規認證，同時感測器根據DIN EN ISO 7027採用90°測量方法進行操作。感測器不需任何校正。使用Hach SC系列 digital controllers 數位水質控制主機以顯示和處理監測數據。
The Solitax t-line sc turbidity immersion probe provides high-precision results in clear to strongly turbid liquids. Turbidity measurement performance is certified to MCERTS regulation and the probe operates with a 90° measuring method according to DIN EN ISO 7027. A proven automatic wiper cleaning system allows sustained performance quality in drinking water as well as in waste water applications. The probe does not require any calibration efforts since time-consuming multipoint calibrations with dilution series are replaced by a single correction factor. The Solitax t-line sc probe material is PVC and measurement data is displayed and processed with the help of a digital Hach SC200 or SC1000 controller.
Measuring Principle 量測原理 : Infrared Duo scattered light technique for color-independent turbidity measurement
Turbidity in accordance with DIN EN ISO 7027
Range 量測範圍 : Turbidity: 0.001 - 4000 NTU
Repeatability 重複性 : Turbidity: < 1 %
Response Time T90 反應時間 : 1 - 300 s adjustable
Mounting : Immersion 浸入式
Accuracy:
Turbidity up to 1000 NTU:
without calibration < 5% of the measured value ±0.01 NTU
with calibration < 1% of the measured value ±0.01 NTU
Calibration Method:
Formazin or Stablcal Standard (at 800 NTU)
Applications:
- Nutrient Monitoring
- Pre-Treatment
- Secondary Treatment
- Ultrapure Water
關鍵字: 水中 濁度 線上分析儀, 線上 水中濁度 監測儀, turbidity sensor, online turbidity analyzer, 濁度 傳感器, 線上 濁度計,
Greater accuracy, less maintenance
Hach Solitax sc sensors provide accurate, colour-independent measurement of turbidity and suspended solids in drinking water, wastewater and industrial process applications. A self-cleaning device prevents biological growth and interference of gas bubbles. This system’s reliable performance and full data communication capability help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling.
Excellent correlation to laboratory analysis
Solitax sc sensors show an exceptional correlation to laboratory analysis. On-line measurement not only saves time on manual analysis, but also provides critical real-time measurements that can be used to operate the plant more efficiently.
Fully serviceable sensors
Conventional turbidity and suspended solids sensors are potted and are discarded when they no longer function. Solitax sc sensors are fully serviceable, which often doubles the useful life of the sensor.
Easy one-point calibration
Factory calibrated in conformity with DIN EN ISO 7027 for long-term calibration stability. Calibration is easy with a simple correction factor procedure.
Multi-channel, multi-parameter system
Multiple Solitax sc sensors can be installed on one Hach SC Controller. The same controller can also accommodate any combination of parameters. All of Hach’s model sc sensors are “plug and play” with no complicated wiring or set-up procedure necessary.