餘氯線上分析儀 CLF10 sc Free Chlorine Analyzer (Panel Only) Grab Sample
產品編號：LXV45A.99.11022
Hach’s CLF10 sc and CLT10 sc provide online amperometric solutions for real-time analysis of free or total chlorine in disinfection applications.
Hach 的 CLF10 sc 和 CLT10 sc 用於消毒應用中餘氯或總氯的即時分析。
The CLF10 sc Free Chlorine Analyzer and CLT10 sc Total Chlorine Analyzer measure free or total chlorine continuously for real time process control. It is based on amperometric technology and is fully compatible with all of Hach's digital controllers. The CLF10 sc can be used in most municipal and industrial applications, and is best utilized where waste stream management is a constraint.
Applications 應用 :
Discharge
Groundwater
Influent for Wastewater
Membrane Protection
Municipal Water
Regulations
Surface Water
Measurement Method : Reagentless, electrochemical, three-electrode amperometric system
Range : 0 - 20 ppm Cl₂
Repeatability : 30 ppb or 3%, whichever is greater
Lower Limit of Detection (LOD) : 30 ppb (0.03 ppm)
Certifications 認證 : CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Additional certifications when connected to an sc controller
Controller Compatibility : sc controller platform 相容於 Hach sc 系列控制主機
關鍵字 : 餘氯 監測儀, free chlorine analyzer, chlorine online analyzer, 游離氯 線上分析儀
Hach 的 CLF10 sc 和 CLT10 sc 用於消毒應用中餘氯或總氯的即時分析。
The CLF10 sc Free Chlorine Analyzer and CLT10 sc Total Chlorine Analyzer measure free or total chlorine continuously for real time process control. It is based on amperometric technology and is fully compatible with all of Hach's digital controllers. The CLF10 sc can be used in most municipal and industrial applications, and is best utilized where waste stream management is a constraint.
Applications 應用 :
Discharge
Groundwater
Influent for Wastewater
Membrane Protection
Municipal Water
Regulations
Surface Water
Measurement Method : Reagentless, electrochemical, three-electrode amperometric system
Range : 0 - 20 ppm Cl₂
Repeatability : 30 ppb or 3%, whichever is greater
Lower Limit of Detection (LOD) : 30 ppb (0.03 ppm)
Certifications 認證 : CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Additional certifications when connected to an sc controller
Controller Compatibility : sc controller platform 相容於 Hach sc 系列控制主機
關鍵字 : 餘氯 監測儀, free chlorine analyzer, chlorine online analyzer, 游離氯 線上分析儀
EPA-approved Free or Total Chlorine Analysis 美國EPA 接受的餘氯或總氯分析 - 測試方法 334.0
The CLF10 sc and CLT10 sc chlorine analyzers are compliant with EPA Method 334.0, ensuring that you not only have precise process control, but reportable results as well.
The CLF10 sc and CLT10 sc chlorine analyzers are compliant with EPA Method 334.0, ensuring that you not only have precise process control, but reportable results as well.
No Reagents to Replace, No Waste Stream
Hach’s amperometric chlorine technology does not use reagents, eliminating the need for a sanitary drain and saving you the cost of monthly reagent replacement.
Hach’s amperometric chlorine technology does not use reagents, eliminating the need for a sanitary drain and saving you the cost of monthly reagent replacement.
Chlorine Analysis Made Easy
The CLF10 sc and CLT10 sc are plug-and-play with Hach’s digital controllers, ensuring easy setup. Available with exclusive self-diagnostics, these instruments will alert the user to changes in the process or upcoming maintenance. Hach’s Cal Watch feature will provide a warning for pH or chlorine calibration changes, and a non-contacting flow sensor will notify users of insufficient sample flow. CLF10 sc 和 CLT10 sc 連接 Hach 數位控制器後即可使用，輕鬆設定。儀器自我診斷功能提醒使用者流程中的變更或即將進行的維護。 Hach 的 Cal Watch 功能針對 pH 值或氯校正變化發出警示，非接觸式流量感測器將通知使用者水樣流量不足。
The CLF10 sc and CLT10 sc are plug-and-play with Hach’s digital controllers, ensuring easy setup. Available with exclusive self-diagnostics, these instruments will alert the user to changes in the process or upcoming maintenance. Hach’s Cal Watch feature will provide a warning for pH or chlorine calibration changes, and a non-contacting flow sensor will notify users of insufficient sample flow. CLF10 sc 和 CLT10 sc 連接 Hach 數位控制器後即可使用，輕鬆設定。儀器自我診斷功能提醒使用者流程中的變更或即將進行的維護。 Hach 的 Cal Watch 功能針對 pH 值或氯校正變化發出警示，非接觸式流量感測器將通知使用者水樣流量不足。