水中導電度感測器，高導電度Contacting Conductivity Sensor, High Conductivity (k=5.0), with ¾" PVDF Compression Fitting
產品編號：3422D3A
Ultimate accuracy from ultra-pure to high conductivity applications. 從超純水到高導電度應用之高精準度監測。
Contacting conductivity sensor with a nominal cell constant k = 5.0 cm-1, ¾-inch NPT PVDF compression fitting, 6 m analogue cable, and titanium electrode.
Measuring range 量測範圍 : 0 - 10000 µS/cm.
Accuracy 準確度 : ±2 % of reading above 200 µS/cm
Repeatability 重複性 : ±0.5 % of reading
Response Time T90 反應時間： 30 s
Temperature Sensor 溫度感測 : PT1000 RTD
Operating Temperature Range ： -20 - 200 °C
Pressure Range：： 1.7 bar at 150 °C
Applications 應用 :
Boiler Water
Clean in Place (CIP)
Membrane Protection
*使用 Hach SC系列 controllers 水質控制器進行控制，不用複雜的接線或設定程序，連接後即可立即使用
關鍵字 : 精密型 水中 導電度計, 線上 導電度分析儀, 水中導電度線上監測, online conductivity analyzer, pure water conductivity analysis
Contacting conductivity sensor with a nominal cell constant k = 5.0 cm-1, ¾-inch NPT PVDF compression fitting, 6 m analogue cable, and titanium electrode.
Measuring range 量測範圍 : 0 - 10000 µS/cm.
Accuracy 準確度 : ±2 % of reading above 200 µS/cm
Repeatability 重複性 : ±0.5 % of reading
Response Time T90 反應時間： 30 s
Temperature Sensor 溫度感測 : PT1000 RTD
Operating Temperature Range ： -20 - 200 °C
Pressure Range：： 1.7 bar at 150 °C
Applications 應用 :
Boiler Water
Clean in Place (CIP)
Membrane Protection
*使用 Hach SC系列 controllers 水質控制器進行控制，不用複雜的接線或設定程序，連接後即可立即使用
關鍵字 : 精密型 水中 導電度計, 線上 導電度分析儀, 水中導電度線上監測, online conductivity analyzer, pure water conductivity analysis
High Performance Design
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
These sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a PT1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 ºC accuracy.
Resistivity and Conductivity Measurement Capability
These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.
These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.
Versatile mounting styles
Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.
Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.
Full-Featured “Plug and Play” with Digital Hach SC Controllers
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”
There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”